In extreme industrial scenarios such as coastal high salt spray, high altitude and low temperature, and multi-dust chemical industry, ordinary industrial doors are prone to corrosion, failure, seal failure and other problems, and the door body performance needs to be matched in a targeted manner when selecting. Jiangsu Ambixin Internet of Things Technology Co., Ltd. combines project experience in extreme scenarios to provide professional selection solutions for enterprises.
1. Coastal high salt spray scene: corrosion resistance is the core
In factories in coastal areas, the air salt content is high, and ordinary metal doors are prone to rust, which affects the service life and operational stability. For this type of scene, it is recommended to choose aluminum fast doors or stainless steel frame fire garage doors, the aluminum door body itself has excellent corrosion resistance, with the surface anti-salt spray coating, can resist the erosion of high salt spray air; The stainless steel frame can avoid the deformation of the door structure due to rust, and the sealing structure of the door body should use weather-resistant rubber strips to prevent the intrusion of sea breeze and sand. The aluminum fast door customized by Ambison for the coastal new energy industrial park has been put into use for three years without obvious corrosion and is in stable operation.
2. High altitude and low temperature scenarios: cold resistance and insulation are the key
The temperature in high-altitude areas is low, the temperature difference between day and night is large, and it is often accompanied by strong winds, so industrial doors need to have both super insulation and wind resistance. For high-altitude cold chain storage, the insulation lift door is the core choice, and its ultra-thick polyurethane foam layer can effectively block low temperatures and prevent a large loss of cold storage cooling; The door frame needs to be strengthened to withstand the impact of strong winds in high altitude areas. For high-altitude factory passages, it can be equipped with cold-resistant PVC fast doors, special low-temperature resistant curtain can avoid low-temperature brittle cracking, and the fast opening and closing characteristics can reduce indoor heat leakage and ensure a constant temperature environment in the workshop. The insulation door body solution created by Ambison for a cold chain logistics park in Qinghai-Tibet successfully solves the problem of door body operation and insulation in a high-altitude and low-temperature environment.
3. Multi-dust chemical scenarios: sealing dust prevention and explosion-proof are the focus
There is a lot of dust in the chemical plant area, and there is a risk of flammability and explosion in some areas, and the industrial door needs to have high sealing and dustproof performance and explosion-proof qualifications. For this type of scenario, it is recommended to choose a turbine hard fast door, which can effectively block dust and prevent dust from entering the production workshop and causing potential safety hazards. At the same time, the explosion-proof drive and control system can be customized to meet the use standards of flammable and explosive areas. The transmission parts of the door body need to be equipped with dust-proof shields to avoid dust entry and causing stuttering failures. The explosion-proof hard fast door customized by Ambison for a chemical enterprise has passed the professional explosion-proof certification, which effectively reduces the potential safety hazards of dust and explosion-proof after it is put into use.
Fourth, the windy and sand Gobi scene: wear resistance and impact resistance are the core
Factories in the Gobi region are often attacked by wind and sand, and the door body is susceptible to sand wear and strong wind impact, and the sealing and transmission components of ordinary door bodies are prone to failure. It is recommended to choose a metal fast door with a reinforced sealing structure, the metal material can resist the impact of wind and sand, the special wear-resistant sealing brush can block fine sand from entering the track, and the door body transmission system needs to be regularly cleaned and lubricated to ensure stable operation. The metal fast door customized by Ambison for a photovoltaic industrial park in the northwest Gobi is perfectly adapted to the wind and sand working conditions and provides reliable protection for the equipment in the factory area.
